In accordance with the Resolution of the Cabinet of Ministers of Ukraine dated March 19, 1994 No. 172 “On Protection of Consumer Rights”, products made of natural and artificial hair (wigs and systems) cannot be exchanged or returned.
Yours faithfully,
SV Atelier Team
Training course includes:
The training course is conducted by:
Master of the highest category – Kornienko Aishe
Technologist – Sergey Vorontsov
An individual course:
Group training – 900$
*Binding condition – 60% prepayment
In case of cancellation less than 48 hours before the course start the money will not be refunded.
If for some reason you cannot be on the fixed dates, you must notify us in advance and we will postpone the course date.
Training course includes:
The training course is conducted by:
Master of the highest category – Aishe Kornienko
Technologist – Sergey Vorontsov
An individual course:
*Binding condition – 60% prepayment
In case of cancellation less than 48 hours before the course start the money will not be refunded.
If for some reason you cannot be on the fixed dates, you must notify us in advance and we will postpone the course date.
Training course includes:
1. Theory
2. Practice
3. Examination
The training course is conducted by:
Master of the highest category – Aishe Kornienko
Technologist – Sergey Vorontsov
Timing of training:
*Binding condition – 60% prepayment
In case of cancellation less than 48 hours before the course start the money will not be refunded.
If for some reason you cannot be on the fixed dates, you must notify us in advance and we will postpone the course date.
Primary system fitting – cutting of mesh according to the peculiarities of client’s hair growth and hairline. Haircut of the product. Insertion of the baby hairs, tinting and dying of the wig/system. Making of braids which fits the system, fitting of the system with the help of tape/gel, sewing the system to the braids with the help of threads.
During the correction the master removes the system, washes the client’s scalp with deep cleansing shampoos, washes the product and weaves the braids for further wearing of the system.
* The timing of repairs is discussed individually!
[ut_header align=”center” title=”Caps by SV Atelier”][/ut_header]
The cost of the cap is 80 €.
[ut_header align=”center” title=”Imitation of head skin”][/ut_header]
After the fliselin glue a mesh is installed (so-called imitation skin), which has the size 16 by 16. The craftsman can trim it.
This composition costs 100 $.
The imitation head skin is most often tightened in a loop, so the master always has the opportunity to cut it out.
[ut_header align=”center” title=”Additional SV Atelier products”][/ut_header]
Price
Headband width
Training course includes:
1. Theory
2. Practice
3. Examination
The training course is conducted by:
Master of the highest category – Aishe Kornienko
Technologist – Sergey Vorontsov
Timing of training:
An individual course:
Group training – 900$
*Binding condition – 60% prepayment
In case of cancellation less than 48 hours before the course start the money will not be refunded.
If for some reason you cannot be on the fixed dates, you must notify us in advance and we will postpone the course date.
We are pleased to present our new product – shampoo from SV Atelier. Only the best for our customers.
Cost — 45$
Extended hair correction:
Extended hair styling (one tress or more)::
Cost of systems – from 1900$ to 2100€
100% natural hair, systems are handcrafted
Primary system fitting
The cost of the primary system fitting is 190$.
Primary system fitting includes:
Correction
The cost of the correction:
Additional Services:
Correction includes:
Training time – 3 days:
The training course is conducted by the chief technologist – Sergey Vorontsov
Individual course: 1500$
Group training: 600$
*Mandatory condition – 60% prepayment
Cancellations made less than 48 hours in advance will not be refunded.
If for some reason you cannot be on the fixed dates, you must notify us in advance and we will postpone the date of the course.
Before washing the system, gently brush your hair with a special comb, fluids, untangle all the nodules, as it will be difficult to do after washing. Avoid contact with the system base when brushing.
It is recommended to wash once a week by yourself or to be served by SV Atelier specialists.
Pour a small amount of water into the container and add 20-30 g of shampoo, put a system wig in the container for 10-15 minutes. After this time, wash the system without making abrupt and vigorous movements. With your hands squeezing the water, gently walk around the circumference of the system, focusing on the areas of the forehead, temples and back of the head, without any circular and sharp movements.
Rinse with cold water, watering the system from the roots to the ends of the hair.
Afterwards, apply the mask if necessary. A conditioner or balm must be applied every time you wash. To preserve the natural look of natural hair and make it silky, use high quality balms, conditioners and moisturizing masks.
Wrap the wet system in a dry towel and press gently. Dry until the towel is completely dry at room temperature. Do not place the product near heat sources – this can cause deformation of the base system (hats – mesh) and hair loss from the product.
Do not brush wet hair. The best method of drying a wig is to dry the product yourself without heat affecting the hair. Gently shake and brush the system dry to 90% by applying a fluid from the tips of the hair to the root. Then place it on a special dummy and use a special comb to give the system the desired shape. You can also use all kinds of plates, curlers, irons.
All tools, combs, care cosmetics and accessories can be purchased in our SV Atelier office.
DO NOT APPLY THE BALM, CONDITIONER, MASK TO THE ROOTS OF THE SYSTEM, BUT ONLY AFTER 10 CM FROM THE ROOTS. APPLY ALONG THE LENGTH!
THE SYSTEMS ARE NOT EXCHANGEABLE AND ARE NOT REFUNDABLE.
Before washing, gently brush your hair with a special comb, untangle all the nodules, as it will be difficult to do after washing. Avoid contact with the system base when brushing.
The system is installed for a month.
It is recommended to wash once a week by yourself or to be serviced by SV Atelier specialists.
It is strictly prohibited to turn your head down while washing.
Apply the shampoo longitudinally from top to bottom and wash the entire length of the head for a few minutes at the root (without circular and sharp energetic movements).
After washing with water, rinse in the direction from the roots to the tips. Then, after stepping back 10cm from the root, apply the mask if necessary. The conditioner or balm is compulsory at each wash.
To preserve the natural look of natural hair and make it silky, use high quality balms, conditioners and moisturizing masks.
Having squeezed off moisture with a towel (without circular and sharp movements), apply oil or fluid, thermal protection (having deviated from a root 10cm). Dry with a hair dryer until it is completely dry. Do not comb wet hair, do not pull hair with a comb, avoid contact with the base of the system (grid).
When the hair is 80% dry, you can start styling. We use special combs. You can also use all sorts of plates, curlers, irons.
All tools, combs, care cosmetics, accessories you can buy in our office SV Atelier.
1. Determine the area to which the system will be attached.
2. Degrease with alcohol this area and edges of the system mesh or its silicone edge. It is good to use a tread for oily scalp – it increases the lifetime of glue and adhesive strips. It also prevents softening of the glue by sweat and grease. Try the system on the head and attach the top to a tape or glue as convenient so that it does not skew. The system’s hair should be in the tail and the edges of the hair should be clamped with pins or clips so that it does not get on the glue and under the system.
3. Then apply glue to the scalp and wait 1.5 – 2 minutes for it to dry up a little (this is very important!). Until it is liquid it can leak through the mesh to the hair. Then press it firmly to your head for 30 seconds and do nothing for 7-10 minutes – let the glue grip. The glue stretches and the brush or tube should be taken away from the place of gluing in sharp movements to prevent it from being applied to everything around. Before washing, the system should be turned inside out, the base should be washed, then turned out and put on the dummy, and only then washed outside.
Before washing the system, gently brush the hair using fluids and remove all nodules, as it is very difficult to do it after washing. When brushing, avoid contact with the base of the system.
Rinse the system with cold water, watering it from the roots to the hair tips. Use a balm. To preserve the natural appearance of natural hair and make it silky, be sure to use high quality balms and moisturizing masks. BALM IS NOT APPLIED TO THE ROOTS (TOP) OF THE SYSTEM, ONLY RETREATING 10 CM!
Wrap the wet system in a dry towel and squeeze it gently. Dry on the towel at room temperature. Do not speed up the drying process by placing the product close to heat sources, as this may result in deformation of the system and hair loss.
Don’t brush wet hair. Shake and brush gently almost dry system using special fluids. Start from the hair tips and move gradually to the roots. Then place it on a special dummy head, and with a brush with wide teeth give the product the desired shape. You can also use all sorts of irons and curlers.
*Премиальная програма обслуживания клиента включает в себя консьерж сервис, в который входят такие услуги, как:
* – This service covers the Premium Class hair replacement system: any length and structure of hair, manufacturing at short notice, and Premium Client Service Program.
It includes concierge service –
[contact-form-7 404 "Not Found"]
EN 
RU 
FR 
UA 
ES 